.. _10 How to cast screen to a TV/TV box/laptop:

10 How to cast screen to a TV/TV box/laptop
==========================================================

To cast screen, please make sure your TV/TV box supports **Miracast**. To find Miracast compatible devices, please refer to Wi-Fi Alliance product finder: https://www.wi-fi.org/miracast-products

To project the VR headset to a laptop, you should ensure that the operating system is Windows 10 system and the network adapter supports **Miracast**.

Below is a way to help you ensure if the network adapter supports Miracast: 

**Step1:** Press “Windows” and “R” together to run a command “dxdiag” (see Figure 1), and then enter the DirectX Diagnostic Tool and click “Save All Information” (see Figure 2). 

.. image:: _static/10.1.png

(Figure 1)

.. image:: _static/10.2.png

(Figure 2)

**Step2:** Save the textfile “DxDiag.txt” on the laptop desktop, and find “Miracast” in this textfile (see Figure 3). “Available” means that the laptop supports Miracast; “Not Available” means that the laptop does not support Miracast.

.. image:: _static/10.3.png

(Figure 3)

G2 4K series/ Neo2 series

**1.** Find Miracast application on TV/TV box, and make sure the application to start scanning.

**2.** Double click "Home" button on headset to pop up shortcut panel.

**3.** Click the "Screencast" button.

.. image:: _static/2.13.png

**4.** Choose projection device from the list.

Note：If you need to project monocular view, please enter the 2D Settings, find "Connected devices" and click to enter, make sure the "Single-eyed Display" is enabled.

.. image:: _static/2.16.png

Neo3 series

**1.** Find Miracast application on TV/TV box, and make sure the application to start scanning.

**2.** Pressing "Home" button to launch quick setting.

**3.** Click the "Screencast" button.

.. image:: _static/2.49.png

**4.** Click the“Screencast”，and select the“Use Miracast“.

.. image:: _static/2.50.png

**5.** Click on the upper right corner to enable projection.

.. image:: _static/2.51.png